DIRECTIONS

It is recommended to let the product reach operative conditions in terms of temperature and humidity at least 24 hours prior to
use, taking care of not stirring it, and apply the product under controlled conditions:
• RECOMMENDED TEMPERATURE RANGE: 20-25°C
• RECOMMENDED HUMIDITY RANGE: 40-60%
The ink is ready to use and it is recommended to use it through the external feeding system (INK FEEDER, CODE M4087..), so
that a steady printing quality is assured.
The printed paper must be transferred hot, through calender or flat press, at a temperature between 180-220°C during a
varying time, between 180” and 30’’.
Time and temperature may vary, depending on the type and nature of the material, which the transfer is made onto.

AUXILIARIES – FLUIDS FOR PLOTTER MAINTENANCE

• DIGISTAR CAPPING FLUID (CODE 408703): this product has moistening and anti-scaling properties, available in 250 ml
container with dosing pipette for application on “capping station”.
• DIGISTAR CLEANER (CODE 408501): this product is used for cleaning the ink feeding circuits.
• DIGISTAR CLEANER NFS (CODE 408503): detergent product for cleaning of the ink feeding circuits, ideal for industrial
equipment. DIGISTAR CLEANER NFS has been specially developed to limit the foam forming.
For further information, see the related technical data sheet.

STORAGE
It is recommended to keep the product away from light and heat sources at a temperature lower than 25° C.

SPECIAL INSTRUCTIONS
• It is recommended to always make printing, drying and transfer tests onto the substrates which are meant to be used, so as
to exactly determine features, working time and effects to be obtained.
• Extreme drying conditions near the printer carriage could compromise the quality of the prints.
• Require safety data sheets, available for all products, and always follow the contained instructions regarding all the specific
information and the environmental safety.
• The ink performance is strictly connected to the used plotter model and printing procedure.